My first arched raised panel door

[Mike Sweat]

Here is my first arched raised panel door. This is the first of three that will be on a base cabinet I'm making for my sister-in law's beauty salon.

<img src="http://www.mandswoodworks.com/assets/images/db_images/db_Picture_1_0074.jpg">

<img src="http://www.mandswoodworks.com/assets/images/db_images/db_Picture_1_0672.jpg">

[Mike Sweat]

OK, I obviously don't know how to post pic's yet! Give me a minute (or a day or three) and I'll get it!

[Noah Alkinburgh]

OK, I obviously don't know how to post pic's yet! Give me a minute (or a day or three) and I'll get it!

Mike,

Its a piece of cake. In fact you can even go back and add it to your original post! :) Look at the bottom of your original post and you will see a button that says edit post...looks like this <img src="http://www.sawmillcreek.org/images/edit.gif">

This will bring up your post and you can make changes. Scroll down the screen a bit and you will see a section on Attatch Files: and a link that says Manage Attatchments

This will bring up a box where you can browse your hard drive and grab you pictures. You do need to make sure the pictures are under 100k I believe. Simple as that :)

Noah

[Mike Sweat]

O K , pics look like there up now.

[Doug Littlejohn]

Really, really nice. I hope my first ones come out close to that good.

[David LaRue]

Great job! :) I see that you jumped right in with an arched raised panel. Is that hickory that you used?

[Bob Lasley]

Nice job Mike. What finish did you use?

Bob

[Kevin Gerstenecker]

Looks great Mike! Keep up the fine work, I look forward to seeing more in the future! Thanks for sharing the Pic.

[David Rose]

Nice job Mike! Slick way of avoiding the hand cut corners that you have with a radius and two horizontals.

David

[Mike Sweat]

Yes, it is hickory I used and finished with Waterlox.

[Daniel Rabinovitz]

Mike
The door looks really great to me.
You did a real nice job! :cool: