PDA

View Full Version : Thanks for the Plastic Dip idea !



Perry Holbrook
06-28-2006, 9:18 PM
In a thread a couple of days ago, I asked about a source for "those little rubber things". Several of you suggested I use Plastic Dip instead so I did. I have attached a picture of how it came out.

I needed to be able to wash small pieces of glass in a rack in the kitchen dishwasher. I found a wire rack at HD and then added several rows of wire shelving cut to size . I used wire ties to secure everything. The Plastic Dip was used to coat any exposed bare metal.

I've run 3 loads today and it looks like this is going to work. The second picture shows the rack in the dishwasher with 100 2"x2" pieces of glass ready to be washed. This is going to save me a lot of time in the studio.

Thanks for the suggestions. Perry

Mark Rios
06-28-2006, 9:28 PM
Very nice job Perry. Aren't these folks around here just fantabulous?

Dennis Peacock
06-28-2006, 10:18 PM
Looks real good Perry!!!!! Let us know how well it works after a few weeks use. Inquiring minds wanna know. ;)