Quick lift installation

[Peter Pedisich]

I'd like to thank Andy L. / Tony F. / Tom H. & Bill S. for your advice on a router lift.

I decided on a Woodpecker Quick-Lift in the Bench Dog plate size for my homemade router table (I cut the top on a cnc at work:D )

Hopefully I'll get some shop time this Sat. to test it out.

Pete

[Richard Wolf]

Nice job Peter.

Richard

[Corey Hallagan]

Good looking set up Peter!

corey

[Larry Cooke]

(I cut the top on a cnc at work:D )Cheater! :D

Looks very nice Peter, it should sever you well.

Larry

[Grant Davis]

Peter,
What type of fence is that?

Thanks,
Grant

[Jim Becker]

Wow...nice machining job!

[Peter Pedisich]

Thanks, guys.

The router table and top I made about 5 years ago in 2001. I just routed the plate recess about 1/64 deeper for the aluminum plate which was slightly thicker than the plexi plate I had in there.

Pete