Tom Hamilton
06-15-2006, 8:59 PM
Once again the fellowship of Creeker's rises to the occasion. Cecil Arnold came by today to help unload the new Grizzly 513X Bandsaw.
After a shop tour and visit the SAIA truck showed up and the driver wheeled the saw, all 416 lbs up the drive into the garage and up onto the wooden shop floor. The saw arrived undamaged.
Cecil and I cheered him on and sent him off with a cold beverage. :D
Cecil then did help uncrate the beast and get it off the pallet and onto the mobile base.
So tomorrow is assembly and hopefully test cut day.
Thanks Cecil for the help. ;)
Oh, Tyler, pics: 40976
Tom, in Houston, carefully reading the assembly manual
After a shop tour and visit the SAIA truck showed up and the driver wheeled the saw, all 416 lbs up the drive into the garage and up onto the wooden shop floor. The saw arrived undamaged.
Cecil and I cheered him on and sent him off with a cold beverage. :D
Cecil then did help uncrate the beast and get it off the pallet and onto the mobile base.
So tomorrow is assembly and hopefully test cut day.
Thanks Cecil for the help. ;)
Oh, Tyler, pics: 40976
Tom, in Houston, carefully reading the assembly manual