Rob Wilson
06-09-2006, 3:23 PM
I recently bought a used Delta 28-276 14" bandsaw. It's in prime condition, however, the upper belt guard will not fit over the pulley/belt. Delta sent me a second cover (at no charge) thinking that the original was the wrong one, but it's the same size.
Now I'm thinking it must have come with the wrong pulley. The pulley on the bandsaw is 7" diameter. (The guard is 7-1/8" wide which doesn't leave room for the belt.) The original owner swears he didn't change any components.
I'd appreciate it if someone with a 28-276 could measure their upper pulley diameter. This would sure help when I call Delta back.
Thanks, Rob
Now I'm thinking it must have come with the wrong pulley. The pulley on the bandsaw is 7" diameter. (The guard is 7-1/8" wide which doesn't leave room for the belt.) The original owner swears he didn't change any components.
I'd appreciate it if someone with a 28-276 could measure their upper pulley diameter. This would sure help when I call Delta back.
Thanks, Rob