Tom Majewski
06-04-2006, 2:20 PM
Thanks to all and all your help. Got evertyhing running great except for an alignment/indexing problem with Laser Master2 software. Everthing is 1/4" off. I just make up for it by burning a dummy piece and replacing it with a real one.
Anyway, here are some projects I did this week, some paid and some free.
The Cermark did some stainless pretty good. The radio-controlled helicopter tailbooms- well now everybody at the hobby shop wants one!
The plastic electronic boxes are ABS and stunk up the house. I did 12 of these so far and they want more. Took a couple trial and error to get the settings right.
Tom
Anyway, here are some projects I did this week, some paid and some free.
The Cermark did some stainless pretty good. The radio-controlled helicopter tailbooms- well now everybody at the hobby shop wants one!
The plastic electronic boxes are ABS and stunk up the house. I did 12 of these so far and they want more. Took a couple trial and error to get the settings right.
Tom