Steve Ash
05-31-2006, 2:35 PM
I posted this a week or two back... http://www.sawmillcreek.org/showthread.php?t=36983
I had a few hours after I got done with work to go have a looksee. Quite a lot going on there with all the turning,log home timber framing and chainsaw carving I snapped a few pictures for you all to see and if some of you are close enough you might want to check it out since it goes on through the weekend.
I talked for a while to the guy in the picture, he was quite interesting. He made his own lathe out of a double end buffer. Also there are some pictures of his turnings.
I had a few hours after I got done with work to go have a looksee. Quite a lot going on there with all the turning,log home timber framing and chainsaw carving I snapped a few pictures for you all to see and if some of you are close enough you might want to check it out since it goes on through the weekend.
I talked for a while to the guy in the picture, he was quite interesting. He made his own lathe out of a double end buffer. Also there are some pictures of his turnings.