First goblets

[Tom Stover]

Here are the first two goblets that I have made. They are both 2 1/4" wide, one is 6" tall and the other is 6 1/2" tall.They are cherry and finished with Deft spray lacquer. The bowl is from the same log as the goblets and is about 1/4" thick. It is finished with three coats of BLO and buffed. Oh, it is 4 1/2" by 5 1/4".

[Corey Hallagan]

Excellent work Tom, they look just great. And that natural edge bowl looks real nice!

Corey

[Gary Max]

Great looking job Tom---you did the cherry proud---are you still turning on the Mini???

[Christopher K. Hartley]

Tom, great work. I really like all three!:D

[Ken Fitzgerald]

Very, very nice Tom! I like the trio!

[Tom Stover]

Thanks guys for the good words and yes Gary I'm still using the midi. I can't afford anything bigger. :D ;)

[Jim Ketron]

Nice looking work!

[Bernie Weishapl]

Those are great Tom. Nice work.

[John Hart]

Cool set Tom! They deserve a corner of their own in the house somewhere. :)

[John Miliunas]

That is a nice set, Tom! :) I especially like the NE bowl...Good job! :) :cool:

[Stu Ablett in Tokyo Japan]

Way to go, nice work!!

Love the wood, and you did it proud!

Cheers!

[Henry C. Gernhardt, III]

Very nice pieces, Tom. Did you use a faceplate or a chuck?

[Keith Burns]

Nice "first" Goblets Tom. Nice form and finish. Great NE as well. :) :)

[Tom Stover]

Thanks again guys, and Henry I used my Talon chuck for all three of them. I find using the chuck is more to my liking than the faceplate.

[Henry C. Gernhardt, III]

Thanks for the info, Tom.

Great... I've had my lathe for only a week and I'm already trying to figure out how much I can spend on a chuck... :P

Lovin' the Vortex! :)

[Dick Parr]

Great looking goblets Tom!

[Jason Christenson]

Nice. Very nice.