PDA

View Full Version : Spray painting Veneer



Nigel Morgan
05-27-2006, 4:31 AM
Hello,

I am getting some bleed when I spray the wood after engraving, are there any tips or advice from anyone please.

Cheers

Nigel

Dave Jones
05-27-2006, 10:44 AM
Somebody here suggested spraying with clear first. Then after that dries use the colored paint.

Jay Purkey
05-28-2006, 1:27 PM
I use a 50/50 soultion of elmers wood glue and water, and paint the engraved area let it dry, then color paint. After all is dry I remove the masking tape.

Joe Pelonio
05-28-2006, 9:49 PM
Spray clear before engraving. When it's dry apply transfer tape, engrave, then spray clear again before the color. Remove transfer tape and you can clear again to protect the color and add another coat to the background. Krylon works great and dries fast