Nissim Avrahami
05-22-2006, 8:46 AM
Good day
I bought those cheap grip clamps ($3 each). After some time I noticed that they are not “gripping” but sliding back. Another problem was, the handle pin housing breaking.
For the pin housing, I drilled hole and replaced the pin with screw washers and nut.
I solved the sliding problem by grinding the narrow sides with # 40 to make them rough.
It was such a good repair, that I made it on all my grip clamps, even the good ones.
Regards
niki
I bought those cheap grip clamps ($3 each). After some time I noticed that they are not “gripping” but sliding back. Another problem was, the handle pin housing breaking.
For the pin housing, I drilled hole and replaced the pin with screw washers and nut.
I solved the sliding problem by grinding the narrow sides with # 40 to make them rough.
It was such a good repair, that I made it on all my grip clamps, even the good ones.
Regards
niki