Steve Gray
05-21-2006, 3:02 PM
Hi Folks, I'm new here and to wood work in general. I've been lurking in the background for a couple of months and have finally decided to post.
I recently purchased a Logosol M7 chainsaw mill and a Stihl ms 660 magnum saw in hopes of learning how saw wood and maybe provide some specialty wood products to others, plus I have a list of things I would like to try to build around our house. I live in West Texas, which is definitly NOT a wooded region. I was planning on mainly cutting mesquite and trying to build a few things and sell them locally. However, once people found out I am willing to come cut trees, I have so much work I haven't even had time to try out the mill yet!:eek: For example, our local golf course is beginning a total revamp soon and there are 30 very large (50 ft) elm trees that will have to be removed. I am suppposed to help take them down, then I can have whatever I would like. I have been told these are "chinese" elms, but I am not sure if the info was correct. This brings me to my first question: If these are Chinese elms, is the wood usable for turning, building projects, etc?
I have also have been given access to a large amount of Pecan, Mesquite, Mulberry, and some Cottonwood. If I have time later this summer I may make a deal for a large amount Oak that is located about 100 miles south of me. Keep in mind, my "large amount" actually amounts to what I can cut, haul (10,000lbs per load), and work after my real job. I have been working 3 nights a week plus Saturdays and I still need 3 solid days to haul home everything I've cut.
Second question: Are there particular sizes of wood that a hobbiest or specialty builder would need? Is there a particular thickness and diameter of log that a turner would use? How do you ship wood affordably? I am completely "at sea" in these area's and hope that ya'll can help.
Once my wife gets off work for the summer (school teacher), she's going to be helping me and manning the camera also, so I should be able to get some pics sent in soon.
I have looked at quite a few sites on the net and you guys / gals here seem to the folks I need to direct these questions to. I am really impressed with your skills at building and turning, and your willingness to help each other. Thanks for any input you could give.
Steve
I recently purchased a Logosol M7 chainsaw mill and a Stihl ms 660 magnum saw in hopes of learning how saw wood and maybe provide some specialty wood products to others, plus I have a list of things I would like to try to build around our house. I live in West Texas, which is definitly NOT a wooded region. I was planning on mainly cutting mesquite and trying to build a few things and sell them locally. However, once people found out I am willing to come cut trees, I have so much work I haven't even had time to try out the mill yet!:eek: For example, our local golf course is beginning a total revamp soon and there are 30 very large (50 ft) elm trees that will have to be removed. I am suppposed to help take them down, then I can have whatever I would like. I have been told these are "chinese" elms, but I am not sure if the info was correct. This brings me to my first question: If these are Chinese elms, is the wood usable for turning, building projects, etc?
I have also have been given access to a large amount of Pecan, Mesquite, Mulberry, and some Cottonwood. If I have time later this summer I may make a deal for a large amount Oak that is located about 100 miles south of me. Keep in mind, my "large amount" actually amounts to what I can cut, haul (10,000lbs per load), and work after my real job. I have been working 3 nights a week plus Saturdays and I still need 3 solid days to haul home everything I've cut.
Second question: Are there particular sizes of wood that a hobbiest or specialty builder would need? Is there a particular thickness and diameter of log that a turner would use? How do you ship wood affordably? I am completely "at sea" in these area's and hope that ya'll can help.
Once my wife gets off work for the summer (school teacher), she's going to be helping me and manning the camera also, so I should be able to get some pics sent in soon.
I have looked at quite a few sites on the net and you guys / gals here seem to the folks I need to direct these questions to. I am really impressed with your skills at building and turning, and your willingness to help each other. Thanks for any input you could give.
Steve