bevel jig for TS

[HR masters]

I have a TS that has an inoperative tilt, and can't afford the downtime to repair. Many years ago I built a jig that attached to the fence that was hinged to give differant angles and locked with sliding arms. My memory is not clear on exactly how I made the jig. If anyone has memory about how a lot of us created those to do what the tilt blade does so well now, I would appreciate hearing from you. thanks HR

[Dave Richards]

This might not be exactly what you want but might give you some ideas. I drew this for someone who wanted to make raised panels on the TS without tilting the blade. You could maybe adapt it for the purpose, though.