View Full Version : needing help bad . . #3 screws
JOHN E Tarro
05-06-2006, 11:42 PM
A number of the hinges and a few other pieces of hardware I use need #3 flat head screws. Invariably I strip the head out or loose one or more. Does anyone know of a source for #3 flat heads about 3/4 inch. Best if they are steel. Thanks much.
Don Frambach
05-07-2006, 2:22 AM
Here's a source for plated steel flat head screws including #3.
http://www.microfasteners.com/catalog/products/TWSSMFP.cfm
JOHN E Tarro
05-07-2006, 4:22 PM
These will probably work fine. Thanks much!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.