Dick Parr
05-05-2006, 2:57 AM
Since I haven't been doing much on the lathe the last month or so, I have been re-organizing the shop, again. I decided to move my vacuum pump from up on the wall behind the lathe into an old TV cabinet to help cut down on the noise and free up some wall space.
I hooked it up now so that the switch is movable so I can hang it off the end of the lathe once I receive the rare earth magnets that I have one order.
Thanks for looking.
http://i62.photobucket.com/albums/h84/DickParr/VacPump.jpg
I hooked it up now so that the switch is movable so I can hang it off the end of the lathe once I receive the rare earth magnets that I have one order.
Thanks for looking.
http://i62.photobucket.com/albums/h84/DickParr/VacPump.jpg