Phil Winn
05-02-2006, 12:58 AM
I bought a new Delta 23-725 8" slow speed grinder, it is the "nicer" one
with the metal toggle switch ($277.00 AT Amazon; $190ish at Packards and at WoodCraft.)
1. How "true" left to right should the grinding
wheels be? (not in and out-that must be dressed)?
2. I replaced the 120 wheel with a 80 grit one-the existing 120 grit had a metal "center axle" bushing...the new 80 grit has a plastic center axle bushing-it seemed like it is press-fit. Should I remove and replace the plastic with the OEM metal center axle bushing?
Thanks,
Phil
with the metal toggle switch ($277.00 AT Amazon; $190ish at Packards and at WoodCraft.)
1. How "true" left to right should the grinding
wheels be? (not in and out-that must be dressed)?
2. I replaced the 120 wheel with a 80 grit one-the existing 120 grit had a metal "center axle" bushing...the new 80 grit has a plastic center axle bushing-it seemed like it is press-fit. Should I remove and replace the plastic with the OEM metal center axle bushing?
Thanks,
Phil