Derek Cohen
04-27-2006, 10:29 PM
The Veritas Skew Angle Jig has just been released. This is one of a few accessories for the Veritas Honing Guide Mk II. Another – not dealt with here – is a unit with a cambered wheel for honing cambered or radiused blades.
The basic Mk II was designed to focus specifically on straight bevels. Before the skew jig was developed, I outlined a strategy to create templates for honing skew blades, link below.
http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=handtools&file=articles_566.shtml
Several months ago I was sent a pre-production version of the jig by Lee Valley for evaluation and feedback. With the release of the production model I was sent this version as well, and I am now in a position to offer my observations on the final form. What I plan to do is illustrate and demonstrate what the skew jig does. The aim is to help you decide whether this jig is going to be useful in your own workshop.
Of course, the skew jig is only going to interest those who (a) have skew blades they wish to sharpen, and (b) already use, or plane to use, the Veritas Honing Guide Mk II.
It is quite amazing how many tools-with-skew-blades are in my workshop. Here are a few for inspection.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/Skewbladecollection.jpg" border="0" alt="" /> <br /></center>
There are skew chisels (for dovetails), a Lie-Nielsen #98/99 side rabbet set, a Stanley #79 side rabbet plane, a Stanley #46 combination plane plus a set of skew blades, a shopmade dovetail plane, an ECE skew filletster, and a Stanley #140 skew block plane.
In my experimentation with the Skew Jig I managed to cover several different blade types, such as those above, and will detail these below.
Overall, I think that the concept of the skew jig is terrific – makes my templates appear hard work! It is straightforward to grasp the principals of its design. I think that we need to start with this. The following instructions and illustrations are taken from the Lee Valley website. Pictures have been added of setting angles on commonly used blades.
<I>The jig attaches to the guide using the same dovetail feature along the front of the blade carrier as the standard registration jig. It is used with the blade carrier set to the 2 (yellow) standard-angle configuration.</I>
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/image001.jpg" border="0" alt="" /> <br /></center>
<I>The jig is designed to hone bevel angles of 20°, 25°, 30° and 35°, and skew angles from 10° to 45° in 5° increments. Skew angles for 18°, 22° and 28° are also included, as these are common angles for skew plane blades.</I>
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/image002.jpg" border="0" alt="" /> <br /></center>
<I>The fence is reversible to accommodate left and right skews. Simply flip it over end for end to orient the blade stop left or right, as needed.</I>
Setting up for the #98/99 LN or Stanley Side Rabbet Planes
Step 1: Set the Bevel Angle
Place the fence in the appropriate groove for the bevel angle you are honing. The fence shown is set for a 25° bevel angle. In the following picture, the jig is being used to determine the skew angle. This is 30°.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-5.jpg" border="0" alt="" /> <br /></center>
The fence is reversible to accommodate left and right skews. Simply flip it over end for end to orient the blade stop left or right, as needed.
Step 2: Setting the Skew Angle
Having established the skew angle, slide the fence so that the blade stop is tangent to the appropriate skew angle line. If the skew angle is known, go directly to this step.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-3.jpg" border="0" alt="" /> <br /></center>
Step 3: Centre the Blade …
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-1.jpg" border="0" alt="" /> <br /></center>
… and you are ready to go.
Setting up for the Stanley #79 Side Rabbet Plane
The blades for the Stanley #79 Side Rabbet Plane have a 30 degree skew angle and should be honed with a bevel of 25 degrees.
These blades are too short to fit the Veritas skew jig set at the desired bevel angle.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79at25degrees.jpg" border="0" alt="" /> <br /></center>
However they will fit if set for a 35 degree bevel angle.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79at35degrees.jpg" border="0" alt="" /> <br /></center>
Now, if the Blade Carrier is locked on the GREEN setting, the bevel will be honed at approx. 25 degrees (the #79 blade is small and I could not be completely sure that my readings were accurate).
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79-1.jpg" border="0" alt="" /> <br /></center>
Setting up for the Stanley #46 Combination Plane
The Stanley #46 Combination plane: blades have a 20 degree skew angle and the bevels are 25 degrees.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/46-3.jpg" border="0" alt="" /> <br /></center>
This was straight forward to set up and hone.
<I> ... continued in part 2.... <I>
The basic Mk II was designed to focus specifically on straight bevels. Before the skew jig was developed, I outlined a strategy to create templates for honing skew blades, link below.
http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=handtools&file=articles_566.shtml
Several months ago I was sent a pre-production version of the jig by Lee Valley for evaluation and feedback. With the release of the production model I was sent this version as well, and I am now in a position to offer my observations on the final form. What I plan to do is illustrate and demonstrate what the skew jig does. The aim is to help you decide whether this jig is going to be useful in your own workshop.
Of course, the skew jig is only going to interest those who (a) have skew blades they wish to sharpen, and (b) already use, or plane to use, the Veritas Honing Guide Mk II.
It is quite amazing how many tools-with-skew-blades are in my workshop. Here are a few for inspection.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/Skewbladecollection.jpg" border="0" alt="" /> <br /></center>
There are skew chisels (for dovetails), a Lie-Nielsen #98/99 side rabbet set, a Stanley #79 side rabbet plane, a Stanley #46 combination plane plus a set of skew blades, a shopmade dovetail plane, an ECE skew filletster, and a Stanley #140 skew block plane.
In my experimentation with the Skew Jig I managed to cover several different blade types, such as those above, and will detail these below.
Overall, I think that the concept of the skew jig is terrific – makes my templates appear hard work! It is straightforward to grasp the principals of its design. I think that we need to start with this. The following instructions and illustrations are taken from the Lee Valley website. Pictures have been added of setting angles on commonly used blades.
<I>The jig attaches to the guide using the same dovetail feature along the front of the blade carrier as the standard registration jig. It is used with the blade carrier set to the 2 (yellow) standard-angle configuration.</I>
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/image001.jpg" border="0" alt="" /> <br /></center>
<I>The jig is designed to hone bevel angles of 20°, 25°, 30° and 35°, and skew angles from 10° to 45° in 5° increments. Skew angles for 18°, 22° and 28° are also included, as these are common angles for skew plane blades.</I>
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/image002.jpg" border="0" alt="" /> <br /></center>
<I>The fence is reversible to accommodate left and right skews. Simply flip it over end for end to orient the blade stop left or right, as needed.</I>
Setting up for the #98/99 LN or Stanley Side Rabbet Planes
Step 1: Set the Bevel Angle
Place the fence in the appropriate groove for the bevel angle you are honing. The fence shown is set for a 25° bevel angle. In the following picture, the jig is being used to determine the skew angle. This is 30°.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-5.jpg" border="0" alt="" /> <br /></center>
The fence is reversible to accommodate left and right skews. Simply flip it over end for end to orient the blade stop left or right, as needed.
Step 2: Setting the Skew Angle
Having established the skew angle, slide the fence so that the blade stop is tangent to the appropriate skew angle line. If the skew angle is known, go directly to this step.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-3.jpg" border="0" alt="" /> <br /></center>
Step 3: Centre the Blade …
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/LN98-1.jpg" border="0" alt="" /> <br /></center>
… and you are ready to go.
Setting up for the Stanley #79 Side Rabbet Plane
The blades for the Stanley #79 Side Rabbet Plane have a 30 degree skew angle and should be honed with a bevel of 25 degrees.
These blades are too short to fit the Veritas skew jig set at the desired bevel angle.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79at25degrees.jpg" border="0" alt="" /> <br /></center>
However they will fit if set for a 35 degree bevel angle.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79at35degrees.jpg" border="0" alt="" /> <br /></center>
Now, if the Blade Carrier is locked on the GREEN setting, the bevel will be honed at approx. 25 degrees (the #79 blade is small and I could not be completely sure that my readings were accurate).
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/79-1.jpg" border="0" alt="" /> <br /></center>
Setting up for the Stanley #46 Combination Plane
The Stanley #46 Combination plane: blades have a 20 degree skew angle and the bevels are 25 degrees.
<center> <div><img src="http://i13.photobucket.com/albums/a262/Derek50/Articles/Veritas%20Skew%20Jig/46-3.jpg" border="0" alt="" /> <br /></center>
This was straight forward to set up and hone.
<I> ... continued in part 2.... <I>