PDA

View Full Version : Photographs for a magazine?



Robert Bosworth
04-25-2006, 11:18 AM
Hey folks -- Sort of an odd request this morning. My digital camera is on the fritz and Diane has an article appearing in Marking Industry Magazine that needs a photograph to go along with it. If you have a decent 300dpi or better photograph showing some of your laser work umm.... can I steal it? ;)

Seriously though, I can't promise a photo-credit on there but I would certainly try to get you one. You would at the very least receive the satisfaction of your work being printed in a magazine. Go ahead and reply here or send me a PM if any of you have a photograph like this handy.

Robert Bosworth
www.usedlasers.com

Rodne Gold
04-25-2006, 2:22 PM
What are you looking for? I mean type of product?
I have a fairly decent DSLR and can easily take something and upload it.
you can see some of my pics at
http://www/rodneycanon.fotopic.net
http://www/rodney2.fotopic.net
http://www/rodney3.fotopic.net
http://www/drgfinger.fotopic.net
http://www/rodg.fotopic.net
http://www/yendor.fotopic.net
No product pics except for some poor ones in rodney3 gallery.
Whats size would you want in pixels ?

Robert Bosworth
04-25-2006, 2:46 PM
Thanks Rodne -- Just would like a photograph showing 3/4/5 things that feature laser engraving. This is just a general article about lasers -- don't need anything too fancy.

A digital SLR is certainly on my want list. The magazine needs something with 300dpi that is suitable for printing. I believe 1920 x 1440 or 2400 x 1600 would be sufficient.

Robert Bosworth
www.usedlasers.com

Joe Pelonio
04-25-2006, 4:59 PM
Ask Dave if you can use the pics he posted of his impressive laser marquetry.

Bruce Larson
04-25-2006, 5:07 PM
Take a look at our website www.magicrouter.com (http://www.magicrouter.com). If you can use any of those let me know and I will send.

Nigel Morgan
04-25-2006, 11:20 PM
Hello Bruce,

Where can I get hold of the lamp base units.

Thanks

Nigel