Terry Quiram
08-25-2003, 8:09 PM
Ungloat first. A friend asked me to help him rework the rails of his pool table. Seems they were attached with lag screws and he wanted T-slots. Setup the table saw to rip the bolt slot with the dado set. Made about 6" into the first cut and ran into the broken tip of a 1/4" lag screw. He said I thought it was deep enough and you wouldn't hit it. :mad: I finished making the cuts but really smoked his boards. He is either sharpening or replacing the dado set.
Gloat. Was in Woodcraft tonight buying the T-slot bit for the above mentioned pool table and they had some lathe tools on sale. Got a Kelton handle and mini hollower set for 50% off. Sorry Kevin they only had one left.
Gloat. Was in Woodcraft tonight buying the T-slot bit for the above mentioned pool table and they had some lathe tools on sale. Got a Kelton handle and mini hollower set for 50% off. Sorry Kevin they only had one left.