View Full Version : New software
Reg Mitchell
04-22-2006, 5:19 PM
Hey guys I found a new software thats pretty nice it even gives a cut list.
tp://www.cabinetplanner.com
give it a try for free....Rob is a cabinet maker and is cahnging things to make it better all the time.
Reg
no more "PRC" machines :D
Mike Wenzloff
04-22-2006, 7:01 PM
Hi Reg,
A fixed link is:
http://www.cabinetplanner.com/
Looks good, btw...
Take care, Mike
Reg Mitchell
04-23-2006, 12:44 AM
its simple and easy for just cabinets.... and in a growing stage and all updates are free. :)
Steve Clardy
04-23-2006, 12:05 PM
Thanks. I downloaded to zip disc yesterday and messed with it a bit.
Looks pretty good so far.
Reg Mitchell
04-23-2006, 4:29 PM
its a pretty nice prog. Not a huge learning curve and so simple. I had him add an allowance for tenone on face frames and doors. He is a nice guy to work with and will answer any questions you have. If you have a suggestion he will listen and take it into consideration I especially like the cut list and you can ecen get an estimate on the materials you will need
:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.