David Fried
04-16-2006, 9:16 PM
Decided to try a box and it actually went quite well. No undue excitement or suborbital launches.
It's some Black Walnut from a tree I cut down in the backyard years ago. I cut the piece to ensure a mix of heartwood and sapwood. The void was filled with coffee grounds and CA. It's 4.5" tall by 2" across. The base is hollowed out 2.75" deep.
I found the two scrapers I have were too large for a piece this small so I reground an old Buck 1/2" skew into a box scraper. It works like a charm!
The exterior is finished with John Hart's Secret recipe and buffed with the Beall stuff I just got (hidden gloat)!
I didn't finish the interior since I was in "get it off the lathe in one piece" mode. Next time!
Thanks for looking.
36605
36606
It's some Black Walnut from a tree I cut down in the backyard years ago. I cut the piece to ensure a mix of heartwood and sapwood. The void was filled with coffee grounds and CA. It's 4.5" tall by 2" across. The base is hollowed out 2.75" deep.
I found the two scrapers I have were too large for a piece this small so I reground an old Buck 1/2" skew into a box scraper. It works like a charm!
The exterior is finished with John Hart's Secret recipe and buffed with the Beall stuff I just got (hidden gloat)!
I didn't finish the interior since I was in "get it off the lathe in one piece" mode. Next time!
Thanks for looking.
36605
36606