Josh Goldsmith
03-29-2006, 10:06 PM
Hello everyone! I was moving my shop around when i found a key for a pulley next to my jointer. The more i looked i noticed that the pully wasn't fully hooked up. The screws that hold the pully on are gone and there was no key in the pully. After putting it all back together with some extra screws i noticed that the pully is worn a little. It is loose on the shaft. My dad came over and we mic'd the shaft and found that the pulley has gotten larger. My question to you is where else can i find a pulley besides grizzly. I emailed them and am waiting for there response on how much it is going to cost but thought that they will be more expensive. I don't know how much they cost. Any other options? Thanks Josh