View Full Version : Rasied Panel Doors
Brent Stone
03-27-2006, 4:15 PM
Anyone know the procedure for making a raised panel door in which the design on the door is not a square? e.g. the top of the door design has an arch in it...
Fred Voorhees
03-27-2006, 6:58 PM
Anyone know the procedure for making a raised panel door in which the design on the door is not a square? e.g. the top of the door design has an arch in it...
One word - templates. You can actually make some yourself or you can splurge and purchase different shapes from various vendors. I have a set of cathedral door templates from CMT and have no qualms about them.
Jake Helmboldt
03-27-2006, 9:20 PM
Brent, Oldham's site has some good info including a page with tips on doing arch-top panels:
http://www.oldham-usa.com/Products/BitsMain/Tip%20and%20tricks/Sect03/EasyStepsArchedRaised.htm
Peter Lyon
03-27-2006, 9:31 PM
CMT has a video on making arched panel doors. It is worthwhile as the arches present a few challenges compared to regular straight stock.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.