Looking for Grizzly and Shop Fox Owners

[Ed Lang]

If you have a

G0564 Edge sander

or

G0450 Drum Sander

or

Shop Fox W1710 wide belt sander

Please let me know how you like (or don't like) the machine.

[Gary Swart]

I have a fair amount of Grizzly machines, but none of those. You might contact Grizzly CS and find out if anyone in your area has these machines and have given the OK for folks to visit them and see the machines in action.

[Richard Wolf]

I have an edge sander from Grizzly. It works fine, but I would suggest you buy replacement belts from another source. The seam on the belts from Grizzly go thump, thump, every time it goes around!

Richard

[Ed Lang]

I have a fair amount of Grizzly machines, but none of those. You might contact Grizzly CS and find out if anyone in your area has these machines and have given the OK for folks to visit them and see the machines in action.

I am going to call them tomorrow but would rather hear from a member here.

Thanks.

[Ed Lang]

I have an edge sander from Grizzly. It works fine, but I would suggest you buy replacement belts from another source. The seam on the belts from Grizzly go thump, thump, every time it goes around!

Richard

Richard,

I noticed the same thing on some 6"X48" belts I had for another machine.

Where do you get yours? PM if you would rather.

[Richard Wolf]

Richard,

I noticed the same thing on some 6"X48" belts I had for another machine.

Where do you get yours? PM if you would rather.

I got some belts from here. I have been happy with their proformance;
http://www.supergrit.com/

Richard