Pictures of Storage Cabinets Beneath Saw Ext. Table?

[Mike Kremer]

Will you please post pics of your table saw setup? I am looking for storage cabinet ideas for beneath my extension table but haven't found many pics.

Thanks.

[terry hansen]

http://www.sawmillcreek.org/showthread.php?t=31274&highlight=table+cabinets

I found this thread to be useful. Hope it helps

[Gary Herrmann]

Mine is in progress. I'll post pics when I'm done.

[Richard Neel]

Welcome to SMC Mike. I noticed this was your first post.

[Laurie Brown]

Here's mine. It's made from plans in Danny Proulx's book, Building Woodshop Workstations.

http://www.aerth.org/Downloads/sawtable.jpg

[Jesse Cloud]

It gets stuff off the floor and organized at least. I just built a plywood platform in the empty floorspace in the mobile base. The platform is the height of the mobile base. Then I slid the cabinet carcase in and secured it with a couple of screws on each end. This is so I can move the saw easily when I want to change how the shop is laid out.
There is a divider in the middle to make it two cabinets, one opening to the ront and another opening to the rear. The front one stores saw blades and accessories. There is a divider in each drawer at 14 inches to separate the blade from whatever else (splitter, ruler, insert, etc) is in that drawer. Haven't decided yet what I am going to put in the rear bay. Will probably add a shelf or two. The pic shows it in the unnatural state of being empty - I know that won't last ;)
Best of all, its made mostly from scrap, so it cost almost nothing.
Its all screwed together butt joints, but it works.