View Full Version : Finishing Douglas Fir Floor
Mike Sweat
08-12-2003, 1:21 AM
I'm finishing a floor of Douglas Fir and would appreciate some input, I was thinking of using a sanding sealer followed by a slightly tinted stain and a top coat that will stand up to traffic, but not so hard it would chip if something was dropped on it.
Any suggestions or alternate methods?
Thanks,
Mike
Eric Apple - Central IN
08-12-2003, 12:07 PM
I'm finishing a floor of Douglas Fir and would appreciate some input, I was thinking of using a sanding sealer followed by a slightly tinted stain and a top coat that will stand up to traffic, but not so hard it would chip if something was dropped on it.
Any suggestions or alternate methods?
Thanks,
Mike
How about:
http://www.fuhrinternational.com/product_pages/855%20product%20data%20sheet.htm
I've used other Fuhr products, but not this one.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.