PDA

View Full Version : Cherry Salad Bowl



Ed Scolforo
03-20-2006, 4:20 PM
This is what I made out of that big piece of cherry I had on my new DVR when I posted the pic awhile back. Unfortunately I caught too much of the gouge tip near the top and the bowl blew up into three pieces.:o Took me 15 minutes to find the third piece! The tenon was ok, so I glued the bowl together and refinished it. You can see my glue joints if you look not too hard but it'll hold water (salad dressing).:) It's 14" diam. by 4" deep. Finished with 2 coats of walnut oil.
Ed

Mike Ramsey
03-20-2006, 4:22 PM
That's a good save Ed. Really looks good!

Mark Cothren
03-20-2006, 4:46 PM
Nice save, Ed!

Andy Hoyt
03-20-2006, 4:50 PM
Looks pretty good from up here, Ed.

Jim Dunn
03-20-2006, 6:06 PM
It'll still hold icecream won't it. Good save!

George Conklin
03-20-2006, 6:32 PM
Nice save indeed, Ed. Looks like Andy's eyeing it to see how much ice cream it'll hold:D .

George

Bernie Weishapl
03-20-2006, 6:41 PM
Nice save Ed. Looks like a wonderful piece. Looks like it would hold a good half gallon of Andy's favorite ice cream.

John Hart
03-20-2006, 6:43 PM
Pretty bowl Ed!! I think it's great that you recovered the pieces and made a go of it!!:)

Jim Ketron
03-20-2006, 6:48 PM
Great Save Ed!
Nice Form!

Corey Hallagan
03-20-2006, 6:49 PM
I agree, looks good to me!

corey

Dick Parr
03-20-2006, 8:51 PM
Looks great Ed, very nice job.

Bruce Shiverdecker
03-20-2006, 9:15 PM
Good Save. If you hadn't told me, I wouldn't know it broke, from what I can see.

Bruce

Travis Stinson
03-20-2006, 11:12 PM
Nice save Ed. Great looking bowl!:cool:

Ernie Nyvall
03-22-2006, 5:48 PM
Nice save there Ed. Looks good.

Ernie