Roy Bennett
03-17-2006, 10:23 PM
:confused: I'm having trouble with my shop made router table. The hex head set screws used to level the insert in the table are rotating due to vibration, causing the insert to become proud of the table. Insert is 3/8" polycarbonate, drilled and tapped for the hex head set screws.
Can I use some thread lock compound? I want to retain the ability to turn the screws to level the table in the future. Any suggestions would be appreciated.
Can I use some thread lock compound? I want to retain the ability to turn the screws to level the table in the future. Any suggestions would be appreciated.