Source for 6" quick disconnect (DC flex hose fitting)

[Ted Christiansen]

Anyone know of a source for 6" quick disconnect fitting? I have found 4", but not 6".

I plan to use this for the tablesaw dust collection when I rebuild my tablesaw island.

Ted

[Steven J Corpstein]

Oneida makes, 4" 5" 6" and 7" quick disconnect male and female components.

http://www.oneida-air.com/products/ductwork/quickconnect.htm

[Jamie Buxton]

My dust collection system has metal duct with 6" flex hose making the connection to each machine. The flex hose plugs on to each machine with nothing more than friction. It stays connected without anything fancy at all.

The connection is the usual one between two pieces of metal duct. That is, the end of one duct is straight, and the other is crimped to fit inside. All of the metal duct came from Home Despot.

[Cameron Reddy]

Good prices on NorFab stuff:

Exfil
Marsh Fred
734-261-1860

FMarsh8956@aol.com

13085 Fairlane St.
Livonia MI 48105-1325


Note: NorFab ducting