New Saw

[Reg Mitchell]

here is the new old saw zI will be going to pick up in a couple weeks...thought you might like to see it
http://www.woodweb.com/exchanges/machinery/posts/406131.html
I just hope my truck is big enough to haul this baby home. :D

[Joe Blankshain]

Reg,

Great score, I am truly jealous of that one. If your truck will not haul it, I can find a home for it. LOL

[Gary Jacuk]

It's a beauty.:) Lots of fun to be had with that piece of iron.
Congratulations!!

Gary

[Brett Baldwin]

Wow, that is one nice score. Even if it didn't work it would make a shop a better place.

[Alan Turner]

Reg,
Bill is a pretty good friend of mine, as well as my dealer of choice. You will enjoy meeting him. Have fun with your new toy.

[Tyler Howell]

OOOOO doggie that's purty.:D :D
Looks heavy too:eek: :eek:

[Reg Mitchell]

Hey Alen,
Yes he is avery nice guy. I have talked to him on nurmous occasions since I started redoing the 232-D I bought. He is very knolageable on the things I needed to know and was willing to send info to me. I hope to be picking it up in the weenen of the 17th.....amybe I can get to emeet you if you live in the area.
This baby I REAL heavy. It suppose to weigh around 3500 to 4000 lbs. It will rest in the barn under a tarp until the concrete floor has cured for at least a month so it can be put in its resting place and fired up to do, hopefully sone nice work.:)

[Vaughn McMillan]

I don't know if that would look quite right in your shop Reg. I think it'd go better with the green carpet in mine. ;)

Very nice haul indeed. Enjoy the new (old) toy.

- Vaughn

[Bill Simmeth]

Hi Reg! Congratulations!! That's a great price on a great saw. As Alan said, you'll enjoy meeting Bill in person. Just an all-around great guy. This is quite a shop you're putting together!

[Michael Pfau]

Reg, very nice saw, you could just leave it in the living room as a conversation piece!

[Reg Mitchell]

Hi Bill,
Yes I hope to have a nice shop befor too long. I have worked for someone all my life and production at that. I will be doing wood working I hope and if I don't starve at least I will be happy doing what I really like. I have a nice girlfriend that said do it if you want and even offered to help in any way she could........what a woman :D

[Bruce Page]

That is some serious iron and a beauty too!

Congrats!

[lou sansone]

can't believe you got a snowflake for that price.... wow. they are basically the heavest duty saw ever made. even heaver than my moak and better looking to boot. I don't know much about the wheels they used. this will be one of the challanges. it looks like the motor is a 900 rpm motor and you may want to find a way to slow it down, but you will have lots of time to figure that out. great score

lou

[Reg Mitchell]

Hey Lou,
Glad you like it. Too I am glad you stopped by because I have a question for you about the wheels. Do you know it the wheels are vulkenized and where would I have to send them to have new tires put on them....

[Rob Russell]

Wow - a snowflake for under a grand. That's a mega-gloat!

[lou sansone]

Hey Lou,
Glad you like it. Too I am glad you stopped by because I have a question for you about the wheels. Do you know it the wheels are vulcanized and where would I have to send them to have new tires put on them....

like I said, I don't have any knowledge about the Yates saws other than they are very attractive and really heavy. If it has carter wheels your all set ( other than forking out 600 bucks for 2 tires ). if they are glued on or vulcanized in place I think you are going to have to make sure about this if it might mean some serious $$ for them to be done. If the rubber is still intact, but somewhat chewed up you can build a little grinding jig and spin the wheel in place and retrue the wheel. keep in mind that these big wheels are balanced and must be to avoid vibration.

best wishes

lou

[George Kretschmann]

That is "Heavy Duty" darn it. It must weigh 2000 pounds easy. You can't beat those old machines. That's a nice find...:D

[lou sansone]

That is "Heavy Duty" darn it. It must weigh 2000 pounds easy. You can't beat those old machines. That's a nice find...:D

try 4000

heavy

lou

[Reg Mitchell]

thanks Lou...I am sure I will be finding out too soon lol......I might be able to find out about it from Bill Kerfoot about them and where I might have to have it done.
Thanks George and Rob. If it runs as good as it looks I should be able to turn it on throw the wood at it and catch a nice set of cabnets on the other side.......:p

[Dev Emch]

I am thinking we should all sing in obnoxious out of tune unison several bars of Let it Snow by that Irving dude. What an excellent bandsaw.

[Scott Vigder]

You'd better be packing a semi when you go to pick that puppy up.

[Mark Singer]

Reg,
That is one beautiful baby! Great price! I am really jealous! Use it well!

[Brad Kimbrell]

You guys never cease to amaze me with your HUGE IRON! My mouth always waters when I see old David Marks on TV with his 16" jointer. Some of those Aircraft Carriers that Lou Sansone has in his shop plus pics of these "Snowflakes" sure are making me jealous.

But seriously, what do you do with a 36" bandsaw? I've never used one bigger than 20" and it was very nice, but these guys are monsters.

The prices seem to be pretty amazing too, but I don't have 3-phase power even if I could find one of these beasts.

Do you guys all run phase converters and if so, what do those fella's cost?

Thanks for the info - still learning, ya' know!

[Reg Mitchell]

Hello Brad
For me i will be useing it to resaw, cut sheet stock some curves building a jig for cutting some logs for beds.
Most run 3 PH converters yes and they are priced for the amount of power you will be useing in motors. If you have a 3 hp motor you can start a 3 hp motor and run a combo of three hp but you can't start aany 2 machines totleing higher that the hp on your converter.
I am lucky though I can get 3 PH power right off of the pole and I am sooooooooooo lucky.
Prices.....whew....from my understanding I really stold this saw. I am looking at a cpl shapers that are pretty pricie like an oliver 287t or a fay egan 552 lightning. the lightning isn't that bad but the only one i have found is in L.A and the shipping it ....WOW to here.
This is a dream I have had since I went to collage and it seems to be developing for me as we speak. :)

[lou sansone]

You guys never cease to amaze me with your HUGE IRON! My mouth always waters when I see old David Marks on TV with his 16" jointer. Some of those Aircraft Carriers that Lou Sansone has in his shop plus pics of these "Snowflakes" sure are making me jealous.

But seriously, what do you do with a 36" band saw? I've never used one bigger than 20" and it was very nice, but these guys are monsters.

The prices seem to be pretty amazing too, but I don't have 3-phase power even if I could find one of these beasts.

Do you guys all run phase converters and if so, what do those fella's cost?

Thanks for the info - still learning, ya' know!


I also have a 3 phase shop... you use a 36" saw just like you would use a 20" saw. you just smile a little more when you are doing it :) .. actually - in the case of BS and some other tools - the ascetics of them really attract me to them. cast iron was a artistic medium for the pattern maker and many took advantage of that ... the snow flake for example - the moak 36 is also the 2nd best looking saw. the northfields are the worse looking CI band saw - the tannewitz is also wonderfully with the double round doors .

but I will say that time and technology has eclipsed some machines and one of them is the sliding table saw. the more I see of the modern slider the more I believe all the obnoxious statements by Mr cresti :) ( no offense ) about them. But for most other machines equipment built from the 40's to the 80's was really very well made. you can go on owwm.com and see lots of old iron and as dev has said... some was real good and some should have been brought right to the dump

lou

[Reg Mitchell]

can't believe you got a snowflake for that price.... wow. they are basically the heavest duty saw ever made. even heaver than my moak and better looking to boot. I don't know much about the wheels they used. this will be one of the challanges. it looks like the motor is a 900 rpm motor and you may want to find a way to slow it down, but you will have lots of time to figure that out. great score

lou
Why would I want to slow it down :confused:

[Dan Racette]

I was just looking at that same saw this aft! Beauty, can't wait to see the pics of it in your shop!

d

[Reg Mitchell]

Hi Rob. Well it wasn't intended as a glot really, It is really to show there are more machines out there that are American made that are better than the "grizGreen" machines that ppl buy for a good price too. :)

[Brandon Shew]

can't believe you got a snowflake for that price.... wow. they are basically the heavest duty saw ever made.

looks like you could cut a car in half with that thing. It probably weighs as much as a car too.