Oak Bowl/Spalted

[Chris DiCiaccio]

This is more bowl practice on a piece of spalted oak which was too far gone. Did what I could. Took it down to 3/8" and didn't feel like it would last with any further reduction in thickness.
33348333493335033351

[Bruce Shiverdecker]

Nice bowl and interesting grain.

Bruce

[Bill Stevener]

You have it coming along now Chris, very nice form.

Bill.>>>>>>>>>>>>>>:)

[Bernie Weishapl]

That is a nice bowl Chris. Nice color and grain in the wood. Great work.

[Curtis O. Seebeck]

Chris,

Nice bowl and beautiful wood. This would be a good candidate to try the epoxy manhatten with. Mix up some epoxy and thin with DNA then saturate the bowl and let it cure. It will harden it up real nice and let you turn it as thin as you want.

[Ernie Nyvall]

Nice work Chris. For a bowl that size the 3/8 walls seem to work just fine.

Ernie

[Don Orr]

That's some practice piece! Very nice! Let us know when you get to the good stuff;) .

[John Hart]

I couldn't help but notice what a nice form you acheived Chris. The shape is exceptional. Maybe you should try that Epoxy Manhatten as Curtis is suggesting....might be worth it.;)

[Corey Hallagan]

Very nice and some real interesting spalting. Nice job Chris, your becoming an expert here :)

Corey

[Keith Burns]

That's some practice piece! Very nice! Let us know when you get to the good stuff;) .

My thoughts exactly !!!:) I think you are past the practice stage, it's time to get serious !

[Jim Ketron]

Great Looking Form!
That is a great classic shape!