PDA

View Full Version : Source for Custom molding knives.


Chris Rosenberger
03-02-2006, 3:10 PM
Does anyone have a source for custom molding knives for a Woodmaster planer? The OEM source I have been using is no longer reliable.
Bill Simmeth
03-02-2006, 3:15 PM
I use Schmidt in Jersey for Williams & Hussey knives. Not sure if they do Woodmaster blades. Worth a check -- they've been around for donkeys' years...
http://www.cggschmidt.com/
Per Swenson
03-02-2006, 5:01 PM
Chris,

Schmidt will cut em no problem.

Per
Steve Clardy
03-02-2006, 5:35 PM
I use Ballew Saw and Tools in Springfield, Mo. mostly.
In a pinch, I use the co. in Kansas City that does the knives for Woodmaster. Woodmaster doesn't do their own.
Jim Hager
03-02-2006, 6:33 PM
I use Ballew Saw and Tools in Springfield, Mo. mostly.
In a pinch, I use the co. in Kansas City that does the knives for Woodmaster. Woodmaster doesn't do their own.

That would likely be WDR Sales in Kansas City. I have used them for the williams and hussey cutters and they do a fairly good job. I had a little trouble getting my point across but they did what was right the first time I asked.
Steve Clardy
03-02-2006, 6:50 PM
That would likely be WDR Sales in Kansas City. I have used them for the williams and hussey cutters and they do a fairly good job. I had a little trouble getting my point across but they did what was right the first time I asked.

Thats them. Had a little CRS and couldn't remember the name.