Jason Morgan
02-27-2006, 12:56 PM
You people are so good at answering all my questions about my TS that I just keep thinking up more and more of them.
Okay, here is another one. Dado cuts are creeping on me. As I cut more and more dados, the depth of cut increases slowly. This is with the lock wheel as tight as I can get it (which ends up still able to move with some effort). Is my locking mechanism not working right, or am I using wrong technique? I notice that deeper cuts tend to make it worse. When my saw is "locked" should I be able to move the wheel at all? (first and only ts I have access to).
Thanks.
Okay, here is another one. Dado cuts are creeping on me. As I cut more and more dados, the depth of cut increases slowly. This is with the lock wheel as tight as I can get it (which ends up still able to move with some effort). Is my locking mechanism not working right, or am I using wrong technique? I notice that deeper cuts tend to make it worse. When my saw is "locked" should I be able to move the wheel at all? (first and only ts I have access to).
Thanks.