Jeff Horton
02-23-2006, 10:08 PM
Going to start rebuilding the DeWalt RAS soon. I am going to build a 4' extention table and an 8' on the other side of the saw once it is in place. I want to add a fence with stop blocks with a tape for measuring lengths. Behind the fence will be roughly a foot of unused space running the length of the tables and against the wall.
I have this set up now with my current RAS and Miter saw. This space just gets piled up with scrap wood and is a royal mess. I have tossed around a couple of ideas but looking for suggestions for the use of this space. I have a couple of windows behind this space so height is an issue at least in some of the space.
So, what would you do with this space?
BTW, I am thinking about using the space under the 4' table to store short peices of wood. Drawers or cabinets under the 8' table.
I have this set up now with my current RAS and Miter saw. This space just gets piled up with scrap wood and is a royal mess. I have tossed around a couple of ideas but looking for suggestions for the use of this space. I have a couple of windows behind this space so height is an issue at least in some of the space.
So, what would you do with this space?
BTW, I am thinking about using the space under the 4' table to store short peices of wood. Drawers or cabinets under the 8' table.