Tool Alignment Videos

[Harish C. Mathur]

I thought I would pass this link on. It has nice videos on aligning your equipment (tablesaw, drill press etc). Most of these can be done with homemade jigs.

http://www.ts-aligner.com/videos.htm

sorry if this is a repeat!

[Jim Becker]

Before the Internet became demanding of manufacturers to post this kind of thing, Ed shipped the videos on tape with the jig. I actually still have it somewhere around here! They are very instructive.

[Doug Shepard]

Before the Internet became demanding of manufacturers to post this kind of thing, Ed shipped the videos on tape with the jig. I actually still have it somewhere around here! They are very instructive.

I know this only too well. Back before I bought my own TS Jr, I borrowed one that a guy at work owned. In the midst of watching the video, the phone rang so I hit pause (I thought) on the VCR. Had to end up buying him a new video when I discovered I'd recorded about 10 minutes of no signal over his TS Video.:eek: I hate when that happens.

[Dave Richards]

Jim, Ed sent me a DVD when I ordered mine last year. I suppose he's still doing that.