Doug Jones
07-29-2003, 9:15 PM
http://www.angelfire.com/de3/dojo/images/mills/Mvc-906s.jpg
Per my chat session with Ken, Jeff, Jason and a few others. Here are a few pics of the saw mills I went to see. Both mills are cut and carry type mills neither has a kiln. they cut, you carry it off.
The link above will take you to a pic that I took of a couple of little mills near my home town. If you replace the 06 in the link with a 07 thru 29 you'll see a new picture with each new number entered. Pics Mvc-907s thru Mvc-916s are of one mill and surrounding area. Pics Mvc-906s, Mvc-917s thru Mvc-929s are of another little mill. If anyone is interested at seeing the pics and can follow my instructions I'll be amazed, not that you understand but rather at my explanation. good luck
Per my chat session with Ken, Jeff, Jason and a few others. Here are a few pics of the saw mills I went to see. Both mills are cut and carry type mills neither has a kiln. they cut, you carry it off.
The link above will take you to a pic that I took of a couple of little mills near my home town. If you replace the 06 in the link with a 07 thru 29 you'll see a new picture with each new number entered. Pics Mvc-907s thru Mvc-916s are of one mill and surrounding area. Pics Mvc-906s, Mvc-917s thru Mvc-929s are of another little mill. If anyone is interested at seeing the pics and can follow my instructions I'll be amazed, not that you understand but rather at my explanation. good luck