View Full Version : Unisaw outfeed table
John F. Gates
02-18-2006, 12:03 PM
I am replacing my temporary one (in use 5 years!) with a good one...
Any plans to recommend? Any size recommendations?
Pictures would be great.
Thanks,
John
Jim Becker
02-18-2006, 12:24 PM
I have an outfeed table plan on my web site that many folks have built.
Michael Gibbons
02-18-2006, 12:27 PM
John, Try the beisemeyer outfeed table. It's 4' x4' with slick high pressure laminate. You will also need legs. Amazon carries them, Kinda steep though, cost you about $300 for both. Or you can buy the legs for about $50 and build the table yourself, although I believe the table comes with mounting hardware
Matt Tawes
02-18-2006, 2:25 PM
Jim Becker's is very nice and as he noted popular with many having built similar ones.
Don Frambach
02-18-2006, 2:48 PM
Another vote for Jim Becker's design.
Russ Massery
02-18-2006, 3:00 PM
yet another vote
Barry O'Mahony
02-18-2006, 3:02 PM
I bought the Beidemeyer legs and built the table myself. 4'x4' is enough to keep a sheet of plywood from falling off.
Fred Voorhees
02-18-2006, 5:28 PM
John, I was one of the people who used Jim Becker's design and absolutely love it. I added it to a contractor table saw and it should be no problem adapting yours to the design. You wanted pics, you have pics of mine below.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.