Jim Shaver, Oakville Ont
07-27-2003, 4:40 PM
Hello,
Turning is not my best talent in wood working, but I enjoy the lathe very much.
<IMG SRC="http://www.imagestation.com/picture/sraid71/p7bd3648ba4203eb21dcf8201d334cd10/fb8ed850.jpg">
<BR>
The other night while working a flat project I found a piece of maple square stock and made this in an hour.
<IMG SRC="http://www.imagestation.com/picture/sraid71/p52e0537c52685bb27819206c1725a344/fb8ed842.jpg">
<BR>
<IMG SRC="http://www.imagestation.com/picture/sraid71/pb1aa709087c5e48e68ad9afe52b43db9/fb8ed847.jpg">
<BR>
I may not be Raffan, but I do like his turned boxes, they inspired me to make this little box.
<IMG SRC="http://www.imagestation.com/picture/sraid71/pc18af9056c9b922c711fec2e062102b3/fb8ed839.jpg">
<BR>
It’s less than 2 inches tall and about an inch across….lots of fun!
Take care,
Jim
Turning is not my best talent in wood working, but I enjoy the lathe very much.
<IMG SRC="http://www.imagestation.com/picture/sraid71/p7bd3648ba4203eb21dcf8201d334cd10/fb8ed850.jpg">
<BR>
The other night while working a flat project I found a piece of maple square stock and made this in an hour.
<IMG SRC="http://www.imagestation.com/picture/sraid71/p52e0537c52685bb27819206c1725a344/fb8ed842.jpg">
<BR>
<IMG SRC="http://www.imagestation.com/picture/sraid71/pb1aa709087c5e48e68ad9afe52b43db9/fb8ed847.jpg">
<BR>
I may not be Raffan, but I do like his turned boxes, they inspired me to make this little box.
<IMG SRC="http://www.imagestation.com/picture/sraid71/pc18af9056c9b922c711fec2e062102b3/fb8ed839.jpg">
<BR>
It’s less than 2 inches tall and about an inch across….lots of fun!
Take care,
Jim