Dave Richards
02-12-2006, 3:13 PM
I just thought I'd post a picture of a dovetail joint I just did. Maybe there's somebody who would like to see it. This was a test joint done with a router in 3/4" stock. The DT bit is HSS 3/8" diameter with a 3/4" cut depth. I think this is much nicer than the DTs made with carbide bits.
The picture is large so I'll just post a link. It'll save those who aren't interested some time. ;)
http://img.photobucket.com/albums/v506/weekender410/DSC027121.jpg
The picture is large so I'll just post a link. It'll save those who aren't interested some time. ;)
http://img.photobucket.com/albums/v506/weekender410/DSC027121.jpg