Tom Jones III
02-10-2006, 9:20 AM
I was tasked with building a hutch that had inset doors and concealed hinges. I bought the hinges pictured, the label on the package was "Blum Mini Inset Hinges". I have installed one of the doors and the gap between the door and the post is huge. The picture includes a screwdriver for scale. I can move the adjusting screws to bring the door close to the post, but if I get it any closer than is shown in the picture, the door will hit the post and will not open.
Have I installed incorrectly, or did I buy the wrong hinges?
I bought the hinges at Rockler, and I just found the web page for these particular hinges,
http://www.rockler.com/findit.cfm?page=5265
Towards the bottom, they show the exact installation I used with the same instructions that were included with the package.
Have I installed incorrectly, or did I buy the wrong hinges?
I bought the hinges at Rockler, and I just found the web page for these particular hinges,
http://www.rockler.com/findit.cfm?page=5265
Towards the bottom, they show the exact installation I used with the same instructions that were included with the package.