liqudating entire wood shop

[David Schmittou]

Due to health reasons, I can no longer use my shop, I'll be selling everything starting with my Lathe tools and the Powermatic 3520B:
Woodcutter coring tool W/laser. $350
Sorby texturing tools - the complete set W/ micro set. $250
Sorby captive ring tool set (3 pc.) $60
Elbow hollowing tool W/ 4 boring bars with cutters. $400
Vacuum chuck W/vacuum pump with gauges.$16Harris chuck system W/reversing adapter. $160
Woodriver turning tol set - large 8 pc. $150
Woodriver micro set, 5 pc. $45
Jameson "Big Bar" with HSS cutter and the tiny carbide cutter, comes with his adjustable tool rest. $225.
As soon as I can figure out how to post pictures - I will.
This is only the tip of the iceberg - If you want it, I probably have it. Many
Tompson tools along with many high end turning tools, sharpening system, 5 chucks, way to much to list. I'm shooting for 65-70% of new - all tools are in like new condition.
If someone is looking for a very complete turning set-up, I can make a decent deal for the lathe and all tooling

[Maurice Mcmurry]

This is sad to see. Sorry about your health struggles.
Where are your tools located?

[David Schmittou]

Michigan - 48661

[David Schmittou]

Are any of you guys getting my answers that I'm sending on P.M.? Not sure If I'm responding correctly

[Maurice Mcmurry]

Are any of you guys getting my answers that I'm sending on P.M.? Not sure If I'm responding correctly

I have not seen any PMs. I am interested in pictures.

[Ricc Havens]

Are any of you guys getting my answers that I'm sending on P.M.? Not sure If I'm responding correctly

I sent you a PM asking if you had any chucks. If so, what did you have and what the price?
And your only response was - "everything is priced at 65-70% of retail"

Which really doesn't tell me anything about what chucks you have.

[David Schmittou]

Try it this way:
2-Super Nova's $125 ea. , 1 G-3 $95, 1 nova Titan w/ 5" power grip jaws $225, 1 that uses tommy bars, not sure of the brand but a nice chuck $65 all chucks will come with jaws, maybe 2 sets depending on what one's you want looking for

[Steve Bujalski]

PM sent on the Jamieson rig.

[James Tibbetts]

David what thread are the chuck inserts please?

[Phil Gaudio]

PM sent. Thanks

[Ricc Havens]

Try it this way:
2-Super Nova's $125 ea. , 1 G-3 $95, 1 nova Titan w/ 5" power grip jaws $225, 1 that uses tommy bars, not sure of the brand but a nice chuck $65 all chucks will come with jaws, maybe 2 sets depending on what one's you want looking for

Thanks David, but I will pass. I'm looking for Vicmarc chucks.

[David Schmittou]

David what thread are the chuck inserts please?

1 1/4 x 8 to fit a 3520

[David Schmittou]

Pictures:
519627519628519629519630519631519632

[David Schmittou]

Pictures:51963351963451963551963651963651963751963 8

[David Schmittou]

519670519671519672519673519674519675519670

[David Schmittou]

David what thread are the chuck inserts please? 1 1/4 x 8"

[Phil Gaudio]

David: Check your PayPal. Thanks Phil

[Sam Force]

How much for the vacuum pump and all the fittings and everything that goes with it? Do you have the fittings to use with the 3520?

[David Schmittou]

Yea, everything - vac. chuck, draw bar, pump, gauge and everything to put it on and use it. I like having the Gauge so I can see if it starts leaking - never been a problem but like to be sure

[David Schmittou]

I have no idea of what I'm doing wrong - I'm answering all the private messages - some three times and they are not showing up. I see I included a picture of my Longworth chuck - I'll take $100 for it. I really need to start selling this stuff, like I said this is only about 30% of the lathe tools that I have. I guess it's nothing to be ashamed of but I can no longer afford to pay my co-pay for my treatments and I have to have them just to be able to walk comfortably .

[David Schmittou]

Yes everything to mount on the 3520, the chuck, draw bar, vacuum pump, guage (to watch to make sure it's not losing vacuum) and all fittings a nd tubing - $160

[James Tibbetts]

Hi Dave,
Check your pm's please. :)

[Tom M King]

Click on Notifications at the top to get to PM's. The sent messages are sometimes hard to find for me too.

[tom lucas]

I have no idea of what I'm doing wrong - I'm answering all the private messages - some three times and they are not showing up. I see I included a picture of my Longworth chuck - I'll take $100 for it. I really need to start selling this stuff, like I said this is only about 30% of the lathe tools that I have. I guess it's nothing to be ashamed of but I can no longer afford to pay my co-pay for my treatments and I have to have them just to be able to walk comfortably .

I'm getting your PM's. If you want to save your sent messages, you have to set your account to do so.

[Bert McMahan]

Hi David, any chance you have any carbide insert tools? I may be interested in a radiused square cutter if you have one.

Also, to save your sent PM's you have to check this little box:

519877

[David Schmittou]

Sorry I thought I replied to your question - yes I have everything needed to hook it up t to the 3520 price for everything is $160

[David Schmittou]

Yes I have most all the carbide insert tools with a bunch of extra carbide cutters. My radiused tool is made by AZ Carbide and will come with 4 extra new cutters - $105 shipped

[David Schmittou]

I have most of t he carbide tools, my Radiused tool is made by AZ Carbide and will come with 4 extra new cutters, $105 shipped

[Bert McMahan]

Could you send a pic of the radiused square carbide tool? I'm not very familiar with AZ Carbide. Also, what size and how much are the Nova cole jaws (if you're willing to sell them without a chuck)?

[James Tibbetts]

Dave I lost the pm with your address. Could you send it again please?

[Lee Schierer]

I have no idea of what I'm doing wrong - I'm answering all the private messages - some three times and they are not showing up.

When you go to write a PM, before you send it, scroll to the bottom of the page and make sure the boxes are checked like this:
519913
If the box for "Save a copy of this message in your Sent Items folder." isn't checked you won't see a copy of the sent message.

[David Schmittou]

David Schmittou
984 Ski Park Rd.
West Branch MI. 48661

[James Tibbetts]

Thanks Dave. Payment is on the way.
I apologize again for my "senior moment" :)

[David Schmittou]

I understand - believe me lol.

[David Schmittou]

The cole jaws will come with the nova bowl buffers (much safer and a $32 add on new) will talk a 9.2 " bowl internal and 11" external - I would take $55 for those, I also have a 16" Langsworth chuck - the older style that goes in dovetail chuck jaws I'll take 125 for that. Let me know if you need any other information. some reason I can't post a picture on a reply, I'll post it in a new thread - should be right under here - thanks

[David Schmittou]

Arizona Carbide radiused scraper.
520006

[Bert McMahan]

Thanks David. What's the diameter on the Cole jaws and what's the length on that scraper? If you have a link to either of them that would work too. I have a Comet lathe so I want to see if that set would fit since it's not very big. And some of the full size tools can be a little unwieldy with the smaller stuff I normally turn.

[David Schmittou]

The scraper is 21" overall, the nova jaws are 9 1/2" closed - 10 1/2" open on a supernova chuck, I would say that it will hold a bowl as small as 2" to as large as 10", I think that I mentioned it but the scraper comes with 4 new inserts and the one on it is on its first side so 19 new edges I always bought a lifetime supply when I ordered something new