John Mkarthy
04-24-2024, 10:39 AM
Hi all - will try to keep it brief. I got this saw, and immediately re-wired for 110 (was 220) as didn't have 220 in the shop then. I let the project sit, and came back (now have 220 installed) and think I re-wired it for 110 incorrectly, or something else is wrong. The TLDR is that it seemingly is not turning off the start relay/capacitor when it should, and is pulling too much current. I actually would think the overload protector would kick in but that wasn't the case. So really, I don't know what should be wired to what anymore and am questioning everything. The motor nameplate has the wiring, but I am curious about the relay/capacitor/overload protector wiring part, which I can't find anything on.
Does anyone have this saw that could snap a pic inside the junction box and help me out? Or is anyone a wiz at motor wiring that could provide some resources of how I should wire the start relay/capacitor/etc? Kind of lost with all of this stuff, so anything helps. Will attach some pics as well
Motor: 438-02-314-0911 115/230volt, 1.5hp motor
518844518845518846518847518848518849518850
edit: I guess I can't actually view the pictures so assume some others can't as well, but they are just of the disassembled motor, and the motor faceplate
Does anyone have this saw that could snap a pic inside the junction box and help me out? Or is anyone a wiz at motor wiring that could provide some resources of how I should wire the start relay/capacitor/etc? Kind of lost with all of this stuff, so anything helps. Will attach some pics as well
Motor: 438-02-314-0911 115/230volt, 1.5hp motor
518844518845518846518847518848518849518850
edit: I guess I can't actually view the pictures so assume some others can't as well, but they are just of the disassembled motor, and the motor faceplate