View Full Version : hardware for salt and pepper shakers
Joe Bradshaw
04-02-2024, 4:44 PM
I am trying to source the metal inserts that go into the top of the shakers. Also I am looking for the rubber plugs that go into the bottoms. Thanks for your help.
Ken Fitzgerald
04-02-2024, 6:20 PM
Joe,
Here is a link to Craftsupplies kitchenware projects. On page 1 is the rubber bung. On page 2 is the stainless-steel top inserts. https://woodturnerscatalog.com/collections/kitchenware-kits?page=1
Brian Brown
04-02-2024, 7:26 PM
+ 1 for Craft supplies, on both parts.
Dave VanDewerker
04-03-2024, 11:43 AM
I get mine at Craft Supplies also
Craft Supplies USA (https://www.woodturnerscatalog.com/)
I would suggest that you go with steel, not the ceramic grinder. I have had a couple of the ceramic grinders break, I think they were set too tight and the two grinding parts came in contact with each other and broke.
Joe Bradshaw
04-03-2024, 2:43 PM
Thank you all for your help. Joe
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.