PDA

View Full Version : New Member



Jay Bee Aus
02-07-2006, 5:07 AM
Hi Guyshttp://www.sawmillcreek.org/images/icons/icon7.gif
New member to the Forum. I'm from Downunder in Aus. Lasering 10 years and been in industry 17 years. Operate Universal 35w m300.
Wanting to investigate the use of plans that are available for the use of lasering out small similiar designs that Wildwood designs have in their catalogue.
Any help would be great.
Jay Bee Aushttp://www.sawmillcreek.org/images/icons/icon14.gif

Stu Ablett in Tokyo Japan
02-07-2006, 5:26 AM
Welcome to another international member!!

Cheers!

John Bailey
02-07-2006, 5:44 AM
Welcome Jay Bee,

Good to have another international member. I don't know anything about laser, but there's lot's of folks here who do.

John

tod evans
02-07-2006, 6:47 AM
welcome jay, i still fry bacon in a skillet so can`t offer any advice for use with your cooker, sorry:) .02 tod

David Duke
02-07-2006, 8:21 AM
Welcome to the 'Creek Jay, I know you'll find that theres real good folks here. Can't help you with the laser question but as I'm sure you already have seen there is a forum dedicated to laser work.

Mark Singer
02-07-2006, 8:27 AM
Welcome and glad you can join us!

Jay Knoll
02-07-2006, 1:22 PM
Jay

Always good to see another member of the "Jay Club" wade into the Creek.

I don't do laser stuff but Pete Simmons from Melbourne FL does some real cool work (well at least the city sounds like if comes from OZ)

Jay

Keith Outten
02-07-2006, 8:34 PM
Hi Guyshttp://www.sawmillcreek.org/images/icons/icon7.gif
New member to the Forum. I'm from Downunder in Aus. Lasering 10 years and been in industry 17 years. Operate Universal 35w m300.
Wanting to investigate the use of plans that are available for the use of lasering out small similiar designs that Wildwood designs have in their catalogue.
Any help would be great.
Jay Bee Aushttp://www.sawmillcreek.org/images/icons/icon14.gif

Jay,

I have ordered a couple of Wildwood's scroll plans and had Aaron Koehl convert them to vector drawings. I believe the first we did was "Fishy" with over 600 holes it was a fair undertaking. We cut several Fishy's then a detailed dragon plan. Be advised it can be time consuming converting the drawings to vector lines for cutting in your laser engraver.

.

Steve Clardy
02-07-2006, 9:16 PM
welcome jay, i still fry bacon in a skillet so can`t offer any advice for use with your cooker, sorry:) .02 tod


Good one Tod!!:D

Oh. Welcome Jay!!

Jay Bee Aus
02-09-2006, 5:51 AM
Hi Stu
I recieved your comments and will adjust my profile inorder to be seen doing the right thing.
Thanks for your concern

Jay Bee Aus

Stu Ablett in Tokyo Japan
02-09-2006, 6:19 AM
Great Jay, I'm very happy you took the suggestion in the spirit it was intended.

So........

Can we see some of you work :D

We REALLY like pictures around here!

Cheers!