Bruce Jones
03-25-2024, 6:24 PM
" Neptune's Amphora"
This segmented piece was made from Curly Maple and Sapele first turned on the lathe with open air ribs. I then hand carved two seahorse handles and mounted them. The piece finished at 16 1/4" tall by 9" diameter. The coloring is wood dye applied with an airbrush final finish was lacquer.
This segmented piece was made from Curly Maple and Sapele first turned on the lathe with open air ribs. I then hand carved two seahorse handles and mounted them. The piece finished at 16 1/4" tall by 9" diameter. The coloring is wood dye applied with an airbrush final finish was lacquer.