Fine Sawdust

[Jerry Thompson]

What is an effective product to stop/reduce sawdust from building up on ones eye glasses? I have tries a couple of products in the past but they weren't worth the money.

Than you.

[Bill Dufour]

I used to use the CVS pump spray but they took the antistatic out. Check ski goggle and motorcycle helmet cleaners.
Bill D

[Dave Sweeney]

I recall reading somewhere that rubbing a dryer sheet on your lenses is supposed to help keep the sawdust off.

[Cliff Polubinsky]

I recall reading somewhere that rubbing a dryer sheet on your lenses is supposed to help keep the sawdust off.

I'd double check that it won't scratch the glasses. They tell you not to use tissue because of scratching. I would think dryer sheets would be worse. Maybe not, but I'd verify first.

Cliff

[Stephen Bandirola]

Maybe you need better dust collection so there isn’t as much dust in the air?

[Jerry Thompson]

The dust is from routing. There is no effective dust collection for hand held routing. I tried one designed for the router and there was no real difference than not using the device without it.

[Richard Coers]

There are a couple good dust collector for hand held routing. https://www.rockler.com/dust-right-click-connect-router-dust-port-and-plate?country=US&sid=V91117&promo=shopping&utm_source=google&utm_medium=cpc&utm_term=&utm_content=pla&utm_campaign=PL&gad_source=1&gclid=CjwKCAjwnv-vBhBdEiwABCYQA8I_BEiMx4vnToImVGvlu1ezwprAoHeW2h9Kk VcEMmQMAhGMhi2CzhoCCmoQAvD_BwE

https://www.oneida-air.com/universal-dust-free-router-hood-accessory-hose-whip-bundle?srsltid=AfmBOopWo3TRKkIK51aKoEm_DvuFuKX69Im 9ygkrxtwwGikZChlJXmPdbS4

[Richard Coers]

And if it's getting on your glasses, it's going in your nose. Once in your lungs, the super fines pass through to your blood and end up in your kidneys and liver. That's the serious damage!

[William Hodge]

And if it's getting on your glasses, it's going in your nose. Once in your lungs, the super fines pass through to your blood and end up in your kidneys and liver. That's the serious damage!

That's a new threat to one's liver that I haven't heard of. Not doubting you, it's just new to me. It would be an add on to that Paul Simon song 50 Ways to Lose Your Liver.

[Jerry Thompson]

I use respiratory protection.

[Jerry Thompson]

Those would not work in my application. I'm using a spoil board bit. I'm setting up a router sled. I am using a Bosch plunge router and the one designed for it is worthless. I've resigned myself to use all the standard safety equipment, e.g., resp. hearing and hearing protection as I usually do. I am tired of sweeping and vacuuming. The amount of material coming off the wood is astounding.

[Brian Runau]

Those would not work in my application. I'm using a spoil board bit. I'm setting up a router sled. I am using a Bosch plunge router and the one designed for it is worthless. I've resigned myself to use all the standard safety equipment, e.g., resp. hearing and hearing protection as I usually do. I am tired of sweeping and vacuuming. The amount of material coming off the wood is astounding.

Tired of sweeping and vacuuming, wrong hobby? Brian

[Zachary Hoyt]

I wonder if you could set up something to blow a small stream of air across the lenses, like some scroll saws and jigsaws have to blow dust off the line of cut? I am imagining a little hose running along each earpiece to a Y at the back of your neck, and a tiny battery powered blower clipped to your collar or something.

[Jerry Thompson]

I've been doing it for 40 years.

[Bill Dufour]

I wonder if you could set up something to blow a small stream of air across the lenses, like some scroll saws and jigsaws have to blow dust off the line of cut? I am imagining a little hose running along each earpiece to a Y at the back of your neck, and a tiny battery powered blower clipped to your collar or something.
Sounds like the supplied air helmets by racal and others.
BillD

[Lee Schierer]

I recall reading somewhere that rubbing a dryer sheet on your lenses is supposed to help keep the sawdust off.

Don't do this if your lenses are plastic. The dryer sheet will scratch them. I used a dryer sheet on my face shield and it pretty much ruined the plastic with scratches.

Bausch & Lomb Savers FogShield XP® Pre-Moistened Lens Cleaning Tissues (https://www.bausch.com/products/safety-industrial-glasses-eyewear-cleaning/tissues-anti-fog-wipes/) provides some anti-static protection.

[Ted Baxter]

I wouldn't use dryer sheets they contain fabric softner in them which will cling to the lens. That said a dryer sheet with fabric softner and a little water is great for removing bugs off of cars and headlights.

[Bradley Gray]

A big fan is pretty good at getting rid of dust. I put it behind me on my shop porch to send the dust away from me.

[Jimmy Harris]

A face shield is probably your best bet. Or maybe a strong fan to blow the sawdust away from you.

Or buy a Festool router that has better dust collection.

Anything that coats your lenses enough to keep sawdust from sticking to it, is probably going to obstruct your vision more than the sawdust would. I wouldn't think antistatic anything would help against sawdust. I mean, and induction motor is pretty much an antistatic generator (it creates an alternating EMF around it which is generally the most effective means of eliminating static buildup), and they get covered in sawdust. Which leads me to believe that it's not a static issue.

[Michael Schuch]

Part of my routine is removing my glasses and blasting them with the blow gun connected to my air compressor.

Darned annoying isn't it!

[John TenEyck]

I have the same annoyance with fine dust. I haven't looked for a remedy; I just wipe them off with my fingers when needed.

I'm amazed at how much grief you got about fine dust killing you, yet many folks think nothing of running their tablesaw w/o a guard nor even a splitter.

John

[Steve Demuth]

And if it's getting on your glasses, it's going in your nose. Once in your lungs, the super fines pass through to your blood and end up in your kidneys and liver. That's the serious damage!

I won't argue that what you say is not technically true, but the part about getting into the blood and then the liver is a stretch, for sawdust. A particle needs to be less than .1 micron or so in diameter to pass through the lungs into the bloodstream. Neither abrasive (sanding) or cutting (as with the OP's question) generates wood particles that small, so unless you're actually burning the wood out with your bits (smoke does create a lot of submicrometer particulates), that's not the big concern. The danger from wood dust really is to the lungs - pulmonary fibrosis caused by particulate matter in sizes in the 1 - 10 micron range. That's also what is on the OP's glasses - something small enough to pass into the blood stream would have to deposit a lot of dust on lenses even to be noticable, and if you had that much suspended in the air, you'd feel like you're in a smoke filled room.

[Justin Rapp]

The dust is from routing. There is no effective dust collection for hand held routing. I tried one designed for the router and there was no real difference than not using the device without it.

I don't agree with this statement. They make attachments for some routers to connect to dust collection. My makita hand trimmer router works great with the attached dust collector.

[Jerry Thompson]

The attachment designed for the Bosch router I am using is not effective in spoil board routing period. I will give it a go next time I use it for another application.

[Rod Sheridan]

What is an effective product to stop/reduce sawdust from building up on ones eye glasses? I have tries a couple of products in the past but they weren't worth the money.

Than you.


Proper dust collection at the source?

Regards, Rod

[Jerry Thompson]

I am using a router sled to remove and flatten wood from board too wide for my 8'' jointer. This removes copious amounts of wood. The accessory for sucking up the sawdust is specifically for my Bosch plunge router and it does, for all intent and purposes, does not work.
I am going to have a go with RainX or Armoral when I get back into the shop.
The accessory may well work with other type router applications.
Thank you.