Rockwell Planer Feed roller chain question

[Sue Iskenderian]

Hi, I have a Rockwell RC-33 13" Planer. Last night it quit feeding and come to find out looks like I busted the master link on the feed roller chain. The part number for that is listed as 428-06-023-0005 but I cannot find it anywhere. Does anyone have any clues about where I can get a replacement?

Thanks

[Rod Sheridan]

Hi Sue, any power transmission company (belts, sprockets, bearings etc will have that in stock.

Farm supply places often have those things as as Harbour Freight

I obviously don’t know who is any your area however there will be suppliers.

Just take the chain with you.

Regards, Rod.

[Sue Iskenderian]

Thanks a bunch Rod. I did find one at McMaster-Carr. Their part number 6027K65. Less than $4.00. The chain is 06B, and uses an offset link. Then I found one believe it or not, on Amazon. Go figure. Appreciate your help.

[Richard Coers]

Roller chain has been standardized since it was invented.

[Ron Citerone]

Interesting to know. You learn a lot on SMC threads.

[Bill Dufour]

Motorcycle shop?
BilLD

[Ronald Blue]

Motorcycle shop?
BilLD

Unlikely. Everything uses larger chain than that, is usually an o-ring type, and is endless.

[Ronald Blue]

It comes up in a google search as a half link. Change the 005 to 004 and it's a master link. If you have any farm stores (Tractor Supply or similar) or farm equipment dealers in your area they should have a 428 master link.

[Rod Sheridan]

Roller chain has been standardized since it was invented.

Yes, however you need to know the chain size, which many people wouldn’t be able to determine.

Regards, Rod.

[Sue Iskenderian]

I usually don't believe in miracles, but here is what happened. Last week I emailed everyone on Ebay that was selling older Delta/Rockwell planer parts. Everyone said that the item was discontinued, or no longer available. Then I got a message back from one of them yesterday to let me know that he found a box of 10 in his warehouse. Go figure. Funny how things work out sometimes. Here's the link incase anyone reading this thread needs an out feed roller sprocket for a Rockwell
RC-33 22-650 Planer. Thank you all for all your help. Learned a lot.


www.ebay.com/itm/364808255377 (http://www.ebay.com/itm/364808255377)

[Warren Lake]

not a miracle but a lesson in persistence, a good thing to have. You kept with it.

Past had a tool and die maker friend he would have made it.