Craftsman professional 315.220381 table dimensions

[Dave Lynch]

Missing the fence and spacer strip on a craftsman pro RAS 315. I just picked up. I can guess on the dimensions but if someone has the width much appreciated. I suspect the fence would have been same material 1” and probably 2” high. I know the length.
Thanks

[Ron Selzer]

going from memory the 3 piece table was 1" manmade material, and the fence was a piece 3/4" thick by 1 1/2 or 2" pine? (solid wood) no knots. watch the height as need motor clearance.
As I remember, cannot get down to the basement shop at this time to check and for at least 4 more weeks.
Ron

[Lee Schierer]

The fence is available at ereplacements.com (https://www.ereplacementparts.com/fence-p-1061077.html)

[Richard Coers]

Craftsman Professional? That's been funny since the day they added on the word. Ever see one in a cabinet shop?

[Bill Dufour]

Make the fence from 6" material and notch the right hand side for motor clearance as needed.
Bill D