Wiring Question

[Mike Keating]

Hello all,

I am wiring my new G0586 jointer today and I have never had to wire any of my tools in the past, I guess since this is the first with a 110/220 option. Anyway, I am going for the 220V option and I was wondering if I did it right. Can anyone with this jointer using it on 220V please comment. I would appreciate it. As the pic shows (kinda) I have the whites lined up, the red (motor side) and the black (cord side) are lined up and I have not touched the yellow and the black on the motor side of things.

I will wire the green to the wiring cover when everything is done. What do you think?

Mike Keating

[Ken Fitzgerald]

Mike....I don't have that jointer but I went to the Grizzley site and looked at the manual for the G0586. According to the manual, you've got it wired for 220vac. Good luck with the new tool!