Sanding Blocks

[Keith Outten]

If I wanted to make some custom sanding blocks that used standard round sanding paper used for an ROS where could I purchase the velcro backing for the sanding block?

[jack duren]

I only keep a 2-3 sanding blocks around. Piece of plywood that I use for 4x24 sanding belts , a rubber sanding block I bought for holding sanding paper and a wood block I use ROS sticky back sandpaper on…Seems to have covered my woodworking for 25 years at my current location..

couldn’t find the sanding block, but found the long sanding block or doors..

[Bruce Page]

Keith, for a few bucks you buy one ready made for H&L disks: https://www.amazon.com/2Pcs-Hand-Sanding-Blocks-Auto/dp/B0BZ2S5RF7?th=1

I have used mine only a few times, but it is great at getting more life out of used disks.
That said, I’m a huge fan of the 3m stikit sanding blocks that see a lot of use in my shop.

[Patty Hann]

If I wanted to make some custom sanding blocks that used standard round sanding paper used for an ROS where could I purchase the velcro backing for the sanding block?

I assumed you didn't want to go wider than 3", but there are products that come wider than that.
Here are some Amazon items, some are adhesive backed, some aren't.
Not sure but maybe the non adhesive backed can be stuck on with two sided tape or epoxy.
Added a link for a 12 x 12" sheet

https://www.amazon.com/s?k=adhesive+backed+velcro+3%22+wide

(https://www.amazon.com/s?k=adhesive+backed+velcro+3%22+wide)https://www.amazon.com/gp/product/B0BVGSGYZ1/ref=twister_dp_update?ie=UTF8&psc=1&redirect=true


(https://www.amazon.com/gp/product/B0BVGSGYZ1/ref=twister_dp_update?ie=UTF8&psc=1&redirect=true)

[Jim Becker]

Amazon has peel and stick H&L pads available that can be "stuck" to a shop made or purchased hand sander that has the right dimension for the media you want to use, typically 5"/125mm or 6"/150mm. I recently bought one for a buffer I picked up at HFT so I could use H&L foam pads.

[Maurice Mcmurry]

Grizzly has the velcro too.
https://www.grizzly.com/products/grizzly-hook-loop-conversion-kit-for-model-g1066r-and-g1079r/h5037?gad_source=1&gclid=Cj0KCQiAwP6sBhDAARIsAPfK_wbqESoGukeLF7koX8rh tnAoQm6SZcIdxeXbhbKw7vBDKwHhWV113tsaAg-cEALw_wcB

This is from Woodmaster tools, Kansas City MO.513597