Dan Richeson
01-07-2024, 11:46 AM
Hello
I bought a new hammer jointer planner and not the happiest with it as it was way out of adjustment. They give you about zero instructions on how to adjust it. I have talked to them a few times and they are very nice but being a weekend warrior its hard to be at home when they call. I'm getting too much snipe on the forward edge of the board. He said I need to adjust the front roller down some. I remove the covers that show the adjusting bolts but I'm not sure what needs to be loosened first. I just don't want to make things worst. I wish they would put out videos showing you how to adjust your 5K machine. Any pictures would be great, Thanks
I bought a new hammer jointer planner and not the happiest with it as it was way out of adjustment. They give you about zero instructions on how to adjust it. I have talked to them a few times and they are very nice but being a weekend warrior its hard to be at home when they call. I'm getting too much snipe on the forward edge of the board. He said I need to adjust the front roller down some. I remove the covers that show the adjusting bolts but I'm not sure what needs to be loosened first. I just don't want to make things worst. I wish they would put out videos showing you how to adjust your 5K machine. Any pictures would be great, Thanks